Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
9
To mount the UC 560 in a rack, follow these steps:
S
TEP
1
Attach a rack–mount bracket to one side of the chassis with the
supplied screws and secure the bracket tightly.
Do not overtorque the screws. The recommended torque is 6 to 8
in-lb (0.7 to 0.9 N-m).
S
TEP
2
Follow the same steps to attach the other bracket to the opposite
side.
S
TEP
3
After the brackets are attached to the unit, use suitable screws to
securely attach the brackets to any standard 19-inch rack.
195677
Left bracket
for 19-inch rack
Right bracket
for 19-inch rack
