Cisco Unified Communications 500 Series Model UC 560 Quick Start Guide
11
Installing the Compact Flash Guard
The compact flash (CF) guard provides protection for the compact flash
memory.
To install the CF-guard:
S
TEP
1
Locate the compact flash slot of the front of the UC 560. See
Front
Panel, page 5
.
S
TEP
2
Slip the right tab on the CF-Guard into the slot on the right side of
the compact flash opening.
S
TEP
3
Place the cover against the surface of the memory slot, aligning
the attachment screw on the left side of the CF-Guard with the
screw hole in the panel.
S
TEP
4
Tighten the attachment screw on the left side of the CF-guard by
using the
supplied T5 Torx wrench.
C
AUTION
Do not remove the CF-guard when the UC 560 is powered on
and running.
195673