11
Hardware Installation Guide for Cisco UCS E-Series Servers
OL-26447-03
E-Series Servers
Double-Wide E-Series Server
The following figure shows the front panel of the double-wide E-Series Server.
Figure 4
Front Panel of the Double-Wide E-Series Server
1
Power switch
2
Reset switch
Note
This resets all CMOS settings.
3
LEDs
4
VGA port
5
Serial port
6
Dual SD Card slots and cover
Note
Do not remove the SD card from the
SD0 card slot when the system is in
operation. The SD card in the SD0
card slot contains the CIMC software
and should always be present.
7
Gigabit Ethernet ports (GE2 and GE3)
8
Management port
9
USB ports
Each port provides up to 500 mA of current.
Devices that require higher power, such as
CD/DVD ROM, need their own external
power.
10
(Optional) HDD2, PCIe assembly or blank
slot
11
Hard disk drives (HDD0 and HDD1)
12
(Optional) Alternate PCIe assembly with
FCoE port
Note
Use with PCIe assembly modules
only.
13
(Optional) Alternate PCIe assembly with
4-Gigabit Ethernet ports
Note
Use with PCIe assembly modules
only.
284517
0
1
SERIAL
MIC
SD1
SD0
VGA
UCS-EXXX-K9-MX
PWR
RST
1
9
M0
M1
M2
HOT
D0F
D0A
D1F
D1A
D2F
D2A
ACT
STS
GE2
GE3
IMC
EN
HDD2
HDD1
HDD0
1
3
4
5
6
7
9
2
8
12
13
10
11