2
Hardware Installation Guide for Cisco UCS E-Series Servers
OL-26447-03
New and Changed Information
New and Changed Information
The following tables provide an overview of the significant changes that are introduced to this guide in
an appropriate software release.
Table 1
New and Changed Information for Software Release 2.3.1
Feature
Description
Changed in
Software Release
Where Documented
Double-Wide E-Series Server
refresh
Intel Ivy Bridge 2418L v2 and
2428L v2 support added on the
UCS-E160D-M2 and
UCS-E180D-M2 double-wide
E-Series Servers.
2.3.1
“Hardware Information for the
M2 E-Series Servers” section on
page 5
Table 2
New and Changed Information for Software Release 2.2.1
Feature
Description
Changed in
Software Release
Where Documented
SM E-Series Network
Compute Engine
Support added to install the SM
E-Series Network Compute Engine
(SM E-Series NCE) into the
Generation 2 Cisco Integrated
Services Routers (ISR G2) and the
Cisco 4451-X Integrated Services
Router (Cisco ISR 4451-X).
2.2.1
“Hardware Information for the
M2 E-Series Servers” section on
page 5
Single-Wide E-Series Server
refresh
Intel Ivy Bridge E3-1105C v2
support added on the
UCS-E140S-M2 single-wide
E-Series Server.
2.2.1
“Hardware Information for the
M2 E-Series Servers” section on
page 5
Table 3
New and Changed Information for Software Release 1.0(2)
Feature
Description
Changed in
Software Release
Where Documented
New Platform Support
Support added to install the
E-Series Server into the Cisco ISR
4451-X.
1.0(2)
•
“Cisco UCS E-Series Servers
Overview” section on page 3
•
“Hardware Requirements”
section on page 3
Verifying E-Series Server
Installation
Command to verify that the router
recognizes the E-Series Server.
1.0(2)
“Verifying E-Series Server
Installation” section on page 27