4-7
Cisco UCS Invicta C3124SA Appliance Administration and Configuration Guide
OL-31370-01
Chapter 4 LUN Configuration
The
Initiators
window appears.
Step 2
Click
Create New Group
.
Step 3
Enter the name of the Initiator Group in the
Name
field and click
Create Group
.
The new Initiator Group name appears on the Initiators list.
Add an Initiator to an Initiator Group
Step 1
Choose
LUN Configuration
> Initiator Groups
.
The
Initiators
window appears.
Step 2
Click an Initiator Group to highlight it and right click.
The right-click options menu appears.
Step 3
Choose
Add Initiator
.
The
Add Initiator to
<
Initiator Group
> dialog box appears.
Step 4
Enter in the WWN/IQN and click
Create Initiator
or click
Cancel
to return to the Initiators list.
Note
Ensure that the WWN for the HBA to which the storage is attached is zoned using the standards used in
your data center.
Map a LUN to an Initiator Group
Caution
Avoid mapping a LUN until an Initiator has been added to the Initiator Group.
Step 1
Choose
LUN Configuration > Initiator Groups
.
The
Initiators
window appears.
Step 2
Click an Initiator Group to highlight it and right click.
The right-click menu appears.
Step 3
Choose
Map LUNs
.
The
Initiator LUN
window appears.
Step 4
Do one of the following to map a LUN:
•
Drag-and-drop a LUN from the Available LUNs list to the Initiator Group’s LUN list above it.
•
Right click a LUN and Choose the Map/Unmap LUN option.
The
Map LUN to Initiator Group
Dialog Box appears.
Caution
Initiators have LUNs mapped starting from Map ID ‘0’. Failure to remap a LUN to Map ID ‘0’ will result
in LUN mapping issues.