3-6
Cisco UCS S3260 Storage Server Chassis Installation and Service Guide
Chapter 3 Maintaining the System
Status LEDs and Buttons
If your system has an optional drive expander module, it has one module status LED:
8
Not used at this time.
•
9
10/100/1000 dedicated
management link activity
•
Off—No link is present.
•
Green—Link is present, no activity.
•
Green, blinking—Link is present, with activity.
10
10/100/1000 dedicated
management link speed
•
Off—Link speed is 10/100 Mbps.
•
Green—Link speed is 1 Gbps.
11
Solid state drive activity
•
Off—There is no drive connected.
•
Green—Drive connected, no activity.
•
Green, blinking—The drive is reading or writing data.
12
Solid state drive fault
•
Off—The drive is operating properly.
•
Amber—This drive has failed (or the Locate function has been activated for the
drive).
13
Not used at this time.
•
14
SIOC health
•
Off—System is idle.
•
Green—SIOC is working normally.
•
Green, blinking—There is a problem with the SIOC or a component in the SIOC.
Table 3-2
Rear-Panel LED States (continued)
LED Name
State
Table 3-3
Drive Expander Module Status LED
LED Status
P3V3
P5V
HDD
Present
HDD Status
Off
None
None
None
None
Green
On
On
Plug-in
Good
Amber
On
On
No plug-in
NA
Amber
On
Fail
No plug-in
NA
Amber
On
On
Plug-in
Fail