Small Cell State / Action
LED Indication
In service, no calls or data sessions
Green
In service, calls or data sessions are active
Slow Blinking Green
In service, experiencing congestion and cannot accept more calls
No physical LAN connection
—
Verify connection with residential gateway
Red blink 1 time in 4 seconds
No connection with router
—
Verify residential gateway is operational
No Internet connection
—
Verify residential gateway is connected to Internet
Red blink 2 times in 4
seconds
RF issue, local interference or poor QoS
—
Verify that phones are not too close to unit
Red blink 3 times in 4
seconds
Over-temperature
—
Verify location of unit and that there is good air flow
Red blink 4 times in 4
seconds
Cannot create secure connection
—
Contact operator
Red
Internal fault
—
Contact operator
RF issue, cannot select an RF profile
—
Verify whether another small cell is located in close
proximity and if so, relocate the small cell
Provisioning failure
—
Contact operator
Safety Instructions
Translated versions of the following safety warnings are provided in Cisco USC 5030 Regulatory Compliance and Safety Information,
located on Cisco.com.
7
