background image

3

Cisco VG224 Documentation

This Document

You can find this quick start guide at the following URL:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/prod_installation_guides_list.html

Regulatory Compliance and Safety Information

The Regulatory Compliance and Safety Information document provides essential safety information applicable to your 
Cisco VG224 and contains multiple-language translations of the safety warnings applicable to this device.

You can find this document at the following URL:

http://www.cisco.com/en/US/docs/routers/access/iad2400/hardware/rcsi/2400rcsi.html

Hardware Installation Guide

The hardware installation guide provides additional detailed description, installation, and cabling information. 

You can find this document at the following URL:

http://www.cisco.com/en/US/docs/routers/access/vg224/hardware/installation/guide/hig.html

Software Configuration Guide

The software configuration guide provides additional detailed configuration information specific to the Cisco VG224 Voice 
Gateway. 

You can find this document at the following URL:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_installation_and_configuration_guides_list.html

Release Notes

Cisco IOS release notes for the Cisco VG224 Voice Gateway provide up-to-date information about Cisco IOS software releases 
used on Cisco VG224 Voice Gateways. 

You can find these documents at the following URL: 

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/prod_release_notes_list.html

Cisco IOS Software Documentation

Master Index to Software Documentation

The master index provides links to topics and commands for each Cisco IOS software release. This includes configuration 
guides, command references, release notes, new feature documentation, and system messages.

You can find master indexes at the following URL: 

http://www.cisco.com/univercd/cc/td/doc/product/software/index.htm

That resource is also available at the following URL:

http://www.cisco.com/public/sw-center/

If you have an account on Cisco.com, you can get updated information about platform support for features from Cisco Feature 
Navigator at the following URL:

http://www.cisco.com/go/cfn

Summary of Contents for VG224 - Analog Phone Gateway





















Reviews: