About this Guide
Organization
xii
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Because of the complexity of an IP telephony network, this guide does not provide
detailed information for required procedures performed on other Cisco or
third-party devices. Refer to the documentation provided with these systems for
installation and configuration instructions.
Organization
Table 1
provides an overview of the organization of this guide.
Related Documentation
For information about Cisco CallManager and additional information about the
VG248, refer to these publications:
•
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
•
Cisco VG248 Analog Phone Gateway Release Notes
•
Cisco CallManager Administration Guide
Table 1
Cisco VG248 Analog Phone Gateway Software Configuration Guide Organization
Chapter Description
Chapter 1, “Overview”
Provides an overview of software features and
how they are implemented on the VG248.
Chapter 2, “Getting Started with the VG248”
Describes the basic network settings you need to
configure on the VG248.
Chapter 3, “Configuring the Telephony Settings
on the VG248”
Includes the procedures for configuring the
telephony settings on the VG248.
Chapter 4, “Configuring Analog Phones Using
Cisco CallManager”
Describes necessary steps in Cisco CallManager
for adding and configuring the VG248 ports.
Chapter 5, “Integrating Cisco CallManager with
Voice Mail Systems Using SMDI”
Provides an overview of SMDI support,
configuration options, instructions for
configuring, and troubleshooting tips.
Chapter 6, “Troubleshooting the VG248”
Provides troubleshooting tips for the VG248.
