Chapter 6 Troubleshooting the VG248
Working with the Event Log
6-24
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Step 1
From the main screen, choose Diagnostics.
Step 2
Choose Event log.
Step 3
Choose Syslog server.
Step 4
Enter the IP address or host name of the network management system you want
to designate as the syslog server.
Selecting Logging Levels and Logged Ports
You can set the VG248 to log progressively more detail (information, errors, or
warnings), or you can restrict logging to specific ports.
Typically, you should configure these options only when working with a Cisco
technical representative because the nature of the problem determines the amount
of information required to resolve it.
To set logging levels or select ports, perform these steps:
Step 1
From the main screen, choose Diagnostics.
Step 2
Choose Event log.
Step 3
Choose Set logging levels or Set logged ports.
Step 4
Work with a Cisco technical representative to determine the best options to select
and enter.
Displaying Recent Messages
You can obtain a list of recent messages from the VG248 to help you resolve some
configuration issues.
To display recent messages, perform these steps:
Step 1
From the main screen, choose Diagnostics.
Step 2
Choose Event log.
