1-7
Cisco VG248 Analog Phone Gateway Hardware Installation Guide
78-13154-01
Chapter 1 Overview
Front Panel
Console Port
Use the console port to connect the VG248 to a console terminal for configuration
and management tasks.
Table 1-4
describes the console port connector pinouts.
Ethernet Port
Use the Ethernet port to connect the VG 248 to the IP network to access
Cisco CallManager.
Table 1-5
describes the Ethernet port connector pinouts.
Ethernet Status Indicators
TX
N/A
Packet transmitted.
Nothing transmitted
RX
N/A
Packet received.
Nothing received
100
Connected at 100 Mbps
N/A
Connected at 10 Mbps or
not connected
Link
Ethernet link connected
N/A
Not connected
Table 1-3
LED Status Explanation (continued)
LED
On
Flashing
Off
Table 1-4
Console Port Connector Pinouts
Pin Number
Function
1, 8
Connected to each
other
2
DTR
3
TxD
4,5
Ground
6
RxD
7
DSR
