Figure 1: Attaching the Brackets to the Chassis
19-inch Rack Mount Bracket
1
23-inch Rack Mount Bracket
2
#6-32 Screws
3
Step 2
Attach the second bracket to the opposite side of the chassis. Use a number-2 Phillips screwdriver to install the number-8
bracket screws.
Your chassis installation must allow unrestricted airflow for chassis cooling.
Attention
Step 3
Use the screws provided with the rack to install the chassis in the rack. For both the 19-inch EIA brackets and the 23-inch
SBC brackets, start the lower pair of screws first, and rest the brackets on the lower screws while you insert the upper
pair of screws.
Installing the Cisco VG420 Voice Gateway
4
Installing the Cisco VG420 Voice Gateway
Mounting the Voice Gateway in Rack
