Appendix B Maintaining the Wide Area Virtualization Engine
Maintaining Your Site Environment
B-2
Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
OL-17739-01
•
Temperature, page B-2
•
Humidity, page B-3
•
Altitude, page B-3
•
Dust and Particles, page B-4
•
Corrosion, page B-4
•
Electrostatic Discharge, page B-4
•
Electromagnetic and Radio Frequency Interference, page B-5
•
Magnetism, page B-5
•
Shock and Vibration, page B-6
•
Power Source Interruptions, page B-6
Temperature
Temperature extremes can cause a variety of problems, including premature aging
and failure of chips or mechanical failure of devices. Extreme temperature
fluctuations can cause chips to become loose in their sockets and can cause
expansion and contraction of disk drive platters, resulting in read or write data
errors.
To minimize the negative effects of the temperature on system performance,
follow these guidelines:
•
Ensure that the system is operated in an environment no colder than 50
°
F
(10 °C) or hotter than 95
°
F (35
°
C).
•
Ensure that the system has adequate ventilation. Do not place it within a
closed-in wall unit or on top of cloth, which can act as insulation. Do not
place it where it will receive direct sunlight, particularly in the afternoon. Do
not place it next to a heat source of any kind, including heating vents during
winter.
Adequate ventilation is particularly important at high altitudes. System
performance may not be optimum when the system is operating at high
temperatures as well as high altitudes.
•
Make sure that all slots and openings on the system remain unobstructed,
especially the fan vent on the back of the system.
Summary of Contents for WAVE-274
Page 4: ......
