21
7
Mount the codec and amplifier
7.1 Mount the codec
Codec and amplifier
1x
codec
1x
amplifier with rack ears
8x
(M5x10, Torx 25)
C2
C3
×2
The codec and amplifier are placed in the
rack cavity.
The connector panels are facing
upward.
1. Remove the eight pre-mounted screws
(Hex
2 mm)
, put the rack ears in place, and fasten
them using the same screws and screw holes.
2. Remove the rubber feet from the codec.
3. Slide the codec into its slot. Fasten it
with four screws
(M5x10, Torx 25)
.
A6
2x
rack ears
Summary of Contents for Webex Room Panorama
Page 1: ...Cisco Webex Room Panorama Installation guide ...
Page 2: ......
Page 83: ...81 ...
Page 87: ......