Configuring the Cisco SPA500S Attendant Console
Setting Up the Cisco SPA500S Attendant Console
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
171
9
BroadSoft syntax
For example, the following enables speed dialing and BLF monitoring, with a BLF
monitoring list URI of marketing, for the user account reception, on a BroadSoft
server with the IP address 192.168.100.1:
fnc
=sd+blf;
sub
=marketing@192.168.100.1;
usr
=reception@192.168.100.1
The
nme
keyword is not used because the BroadSoft server uses the user
account name assigned to the BLF monitoring list.
Note that you can configure a list of BLF subscriptions automatically using a URI
(rather than individually configuring each BLF entry). See the
“Configuring
BroadSoft Busy Lamp Field Auto-Configuration (SPA525G)” section on
page 171
.
Asterisk syntax
The following is an example entry for a Asterisk server. This entry enables speed
dialing, BLF monitoring, and call pickup on a Asterisk server with the IP address
192.168.1.11:
fnc
=sd+blf+cp;
sub
=35890@192.168.1.11;
nme
=35890
Configuring BroadSoft Busy Lamp Field Auto-Configuration
(SPA525G)
Rather than configuring each BLF key individually, you can enter a single
SUBSCRIBE URI and automatically generate configuration scripts for BLF keys for
all users on the monitored list.
To configure BLF auto-configuration:
STEP 1
Log in to the web administration interface.
STEP 2
Click Admin Login.
STEP 3
Click advanced.
STEP 4
Click the Att Console tab.
