SPA and Wireless IP Phone Field Reference
Info Tab
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
183
B
Ext Status
The following parameters show for each extension on the phone.
Line/Call Status
The following parameters show for each line and call on the phone.
Parameter
Description
Registration State
Shows “Registered” if the phone is registered, “Not
Registered” if the phone is not registered to the ITSP.
Last Registration At
Last date and time the line was registered.
Next Registration In
Number of seconds before the next registration
renewal.
Message Waiting
Indicates whether the phone user has a new voice mail
waiting: Yes or No. This is updated when voice mail
notification is received.
Mapped SIP Port
Port number of the SIP port mapped by NAT.
Parameter
Description
Call State
Status of the call.
Tone
Type of tone used by the call.
Encoder
Codec used for encoding.
Decoder
Codec used for decoding.
Type
Direction of the call.
Remote Hold
Indicates whether the far end has placed the call on
hold.
Callback
Indicates whether the call was triggered by a call back
request.
Peer Name
Name of the internal phone.
