Chapter3
Advanced Configuration
RangePlus Wreless PCI Adapter
On the Adapter’s PIN number screen, click Next.
Enter the PIN Number
The Adapter connects to the network.
Connecting to the Network
Click Prnt to print out your wireless network settings.
Then click Fnsh to return to the
Status
screen, or click
Ext to exit the Monitor.
Congratulations
3.
4.
5.
Congratulatons! The Adapter s connected to
the network.
Wireless Network Status
The
Wireless Network Status
screen provides information
on your current network settings.
Wireless Network Status
Rado Band
This is the radio band used on the network.
Wreless Network Name
This is the unique name (SSID)
of the wireless network.
Wreless Mode
This is the mode of the wireless network
currently in use.
Wde Channel
This is the Wireless-N primary channel
used with a 40 MHz radio band network.
Standard Channel
This is the channel used by your
wireless network.
Securty
This is the status of the wireless security
feature.
Authentcaton
This is your wireless network’s
authentication method.
Network Type
This is the wireless network type.
IP Address
This is the IP Address of the Adapter.
Subnet Mask
This is the Adapter’s Subnet Mask.
Default Gateway
This is the Default Gateway address.
DNS
This is the DNS address of the Adapter.
MAC Address
This is the MAC address of the wireless
network’s wireless router or access point.
Sgnal Strength
The Signal Strength bar indicates the
signal strength.
Lnk Qualty
The Link Quality bar indicates the quality of
the wireless network connection.
Statstcs
Click Statstcs to go to the
Wireless Network
Statistics
screen.
