31
Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster
The Administration Tab - Management
Wireless-G Broadband Router with RangeBooster
The Administration Tab - Management
This section of the Administration tab allows the network’s administrator to manage specific Router functions for
access and security.
Management
Router Access
Router Password and Re-enter to Confirm
. You can change the Router’s password from here. Enter a new
Router password and then type it again in the
Re-enter to Confirm
field to confirm.
Web Access
Web Utility Access
. HTTP (HyperText Transport Protocol) - The communications protocol used to connect to
servers on the World Wide Web. HTTPS - Uses SSL (Secured Socket Layer) to encrypt data transmitted for higher
security. Select
HTTP
or
HTTPS
.
Web Utility Access via Wireless
. If you are using your Wireless Router in a public domain where you are giving
wireless access to your guests, you can disable wireless access to the router’s web-based utility. You will only be
able to access the web-based utility via a wired connection if you disable the setting. Select
Enable
to enable
wireless access to the Router’s web-based utility or
Disable
to disable wireless access to the utility.
Remote Access
Remote Management
. To access the Router remotely, from outside the local network, select
Enabled
.
Otherwise, keep the default setting,
Disabled
.
Web Utility Access
. HTTP (HyperText Transport Protocol) - The communications protocol used to connect to
servers on the World Wide Web. HTTPS - Uses SSL (Secured Socket Layer) to encrypt data transmitted for higher
security. Select
HTTP
or
HTTPS
.
Remote Upgrade
. If you want to be able to upgrade the Router remotely, from outside the local network, select
Enabled
. (You must have the Remote Management feature enabled as well.) Otherwise, keep the default setting,
Disabled
.
Figure 5-39: Administration Tab - Management
Note:
When you are in a remote location and wish to manage the Router, enter
http://<Internet IP Address>: port
. Enter the Router’s specific Internet IP address in place of
<Internet IP Address>
, and enter the Administration Port number in place of the word
port
.