Telnet Connection
The EXTender can be configured using a Telnet session over the existing LAN connection. There is a
maximum of four Telnet connections per unit at one time.
IMPORTANT:
•
All IP parameters must be configured before a Telnet session can be established to a unit.
•
The PBXgateway I must be powered up and online (see
Power-up
procedure on page
Error!
Bookmark not defined.
).
Procedure
1. On a computer running Windows, open the Telnet application by selecting
Start/Run
from the
desktop.
2. Enter telnet command along with the IP address assigned to the unit (see below).
Figure 13: Telnet Address
3. Click
OK
. The MI Welcome Screen appears.
EXTender™ IP6000 Quick Installation Guide
31
