BD2-2880/2890 User’s Manual
31
ESC ! n
Collective Specifying Printing Mode
<1B>H<21>H<n>
{0 =< n=< FF} Data is described in Hex code.
Printing mode is assigned. Each n bit indicates the following:
Va lue
Bit Function
0
1
0
Character Font
Font A
Font B
1
Undefined
2
Undefined
3
High-lighting
Canceled
Specified
4
Double
height
Canceled
Specified
5
Double
width
Canceled
Specified
6
Undefined
7
Underline
Canceled
Specified
•
With double height and double width being specified simultaneously, double wide and
double high characters are consisted.
•
An underline is attached to the full character width, which, however, is not attached to
the part having been skipped by the horizontal tab.
Neither is it attached to 90
°
-right-turned characters.
•
The underline width is as having been specified by <ESC ->.
(The default setting is 1 dot width. )
•
Specification with this command is invalid to Kanji, except specification and cancellation
of highlighting
•
In case that double wide character and normal character exist in same one line, the layout
of underline is consistent one.
n = 0
ESC E,ESC
–
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
