Printer Operation
20
2
Normal Operating Mode
When the power is turned on, the printer enters normal operating mode.
The control keys activate the following functions.
POWER
ERROR
FEED
STOP
MENU
PAUSE
On Line
Ready
1
2
3
4
1
PAUSE key: Temporarily pauses printing
• When this key is pushed once, the LCD indicates "Pause" and the
printer temporarily pauses.
• When it is pushed during printing, the printer pauses after the label
currently being printed is issued. Pressing the key a second time
restarts printing and the remaining number of designated labels
are printed.
2
FEED key: Feeds media
• Pressing this key feeds media to the print start position. The
distance it is fed is determined by automatically detecting the front
end of the media when using label media, and when continuous
media has been designated, a fixed quantity is fed, then feeding
stops.
• When the TEAR OFF setting is effective, feeding stops when the
media has been fed to the TEAR OFF location.
• When the optional cutter unit is installed, the media is fed to the
cut position then it is cut.
• If the optional peeler unit is installed, the media is fed to the
peeling location. When the media is pausing at the peeling position,
feeding does not occur, even if the FEED key is pushed.
3
STOP key: It stops printing and cancels the alarm
Pushing this key once during printing puts the printer in pause mode
after the label is issued. It is possible to cancel 1 batch of label issuing
data by pressing the STOP key for 4 seconds or longer in pause status.
(The LCD indicates "Job Clear" during cancel.)
4
MENU key:
In normal operation, this key will enter the menu configuration mode.
It can be configured to repeat the previous label, if preferred.
