- iii -
Important Safety Instructions
1. Read all of these instructions and save them for later reference.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol
cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable ca rt, stand or table.
The product may fall, causing
serious damage to the product.
6. Slots and openings on the cabinet and the back or bottom are provided for ventilation.
To ensure reliable operation of the product and to protect it from overheating, do not block or
cover these openings.
The openings should never be blocked by placing the product on a
bed, sofa, rug or other similar surface.
This product should never be placed near or over a
radiator or heat register.
This product should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should be operated from the type of power source indicated on the marking
label.
If you are not sure of the type of power available, consult your dealer or local power
company.
8. This product is equipped with a three-pronged plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet.
This is a safety feature.
If you
are unable to insert the plug into the outlet, contact yourelectrician to replace your obsolete
outlet.
Do not defeat the safety purpose of the grounding-type plug.
9. Do not allow anything to rest on the power cord.
Do not locate this product where the cord
will be walked on.
10. If an extension cord is used with this product, make sure that the total of the ampere ratings
on the products plugged into the extension cord do not exceed the extension cord ampere
rating.
Also, make sure that the total of all products plugged into the wall outlet does not
exceed 15 amperes for 120V outlet and 7.5 amperes for 220
−
240V outlet.
11.
Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill liquid of any kind on the product.
12. Except as explained elsewhere in this manual, don't attempt to service this product yourself.
Opening and removing those covers that are marked "Do Not Remove" may expose you to
dangerous voltage points or other risks.
Refer all servicing on those compartments to
service personnel.
13. The mains plug on this equipment must be used to disconnect mains power.
Please
ensure that the socket outlet is installed near the equipment and shall be easily accessible.
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions since
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F.
If the product exhibits a distinct change in performance, indicating a need for
service.
Summary of Contents for CLP 6001 CLP-6001 CLP-6001
