Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 205 -
FS FF
[Function]
Printing and feeding black marl/label paper to manual cut position
[Code]
<1C>H <0C>H
[Outline]
[The specification which is common to the model]
1. Printer feeds the printed black mark/label paper to the position for manual cut or peeling off.
2. If FEED switch is pressed at manual cut position, printer feeds the paper back to top print position of black
mark/label.
3. If printer receives print data at manual cut position, printer feeds the paper back to top print position of black
mark/label, then prints the data.
4. This function works regardless of auto cutter setting to be enabled/disabled.
[Caution]
[The specification which is common to the model]
• Valid only if Black mark paper/ label paper is selected.
[See Also]
