Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 107 -
2.2.5 Line Feed Span Commands
ESC 2
[Function]
Specifying 1/6-inch line feed rate
[Code]
<1B>H<32>H
[Outline]
[The specification which depend on the model]
CT-S280
/
CT-S281
/
CT-S300
/
CT-S310
/
CT-P29x series
The line feed rate per line is specified by 1/6 inch.
CT-S2000
/
CT-S4000
/
CT-S801
/
CT-S851
/
CT-S601
/
CT-S651
/
CT-S301II
/
CT-D150
/
CT-E351
The line feed rate per line is specified by MSW5-2 setting.
[Caution]
[The specification which is common to the model]
• Line feed rate can be specified respectively for both STANDARD MODE and PAGE MODE.
[Default]
[The specification which depend on the model]
CT-S280
/
CT-S281
/
CT-S300
/
CT-S310
/
CT-P29x series
Approx. 4.23mm (1/360 inches)
CT-S2000
/
CT-S4000
/
CT-S801(II)
/
CT-S851(II)
/
CT-S601(II)
/
CT-S65
1(II)
/
CT-S301II
/
CT-S251
/
CT-D150
/
CT-E351
(1) MSW 5-2 OFF:
Approx. 4.23mm
(2) MSW 5-2 ON:
Approx. 3.75 mm
