Citizen JCTV1600SA, Instruction Manual

19

ENGLISH

4

Press the Direct Channel Selection buttons or
CHANNEL 

M/?

 button to select the channel to be

recorded.

5

Press the REC/OTR button.
“ 

● 

” and the channel number will

appear on the screen and the
REC/OTR indicator will light.

3

Press the 

▲

 or 

▼

 button to se-

lect the AUTO REPEAT option,
then press the 

B

 or 

A

 button to

select the ON position.

1

Press the MENU button.

2

Press the 

B

 or 

A

 button to select

the 

 option.

TIMER REC SET

AUTO REPEAT

/ / / / MENU

ON

CH

CH

TIMER REC SET

AUTO REPEAT

/ / / / MENU

OFF

CH

CH

When either the F.FWD or REW button is pressed in the
PLAYBACK mode, the speed search picture will appear.
When pressed twice, the search picture will increase
speed. Speed search time depends upon the speed
used (SP, LP or SLP) during recording. See chart below.
To visually search backward or forward, press the REW
or F.FWD button once or twice in the PLAYBACK mode.
Press the PLAY button to resume normal viewing speed.

SPEED SEARCH TIMES

NOTES:

•

The audio output is muted during Speed
Search and Still.

•

A few noise bars will appear on the TV screen
during Speed Search and Still.

•

To prevent damage to the tape, Still and Speed
Search mode is automatically changed to the
Playback mode after 5 minutes.

Press the PAUSE/STILL button in the PLAYBACK mode.
Press the PLAY button or PAUSE/STILL button to resume
normal playback.

Press the SKIP SEARCH button in the PLAY mode. The
VCR will search forward through approximately 30
seconds of the tape (e.g. unwanted commercial time) for
each press of the SKIP SEARCH button (maximum six
presses) and then resume normal playback.

NOTE:

To cancel repeat mode, follow above steps 1 and
2, then press the 

B

 or 

A

 button to select the OFF

position. Press the MENU button to return to the
TV. The repeat function is canceled automatically
when the unit is switched off or the tape is ejected.

1

Load a cassette tape with the erase prevention tab
intact.

2

Press the SPEED button to
select the desired tape speed
SP or SLP. The counter and SP
or SLP will appear on the screen
about 4 seconds.

3

Set the TV/CABLE option to the appropriate position
(see page 15).

00:00:00   SP

NOTES: •

If power is switched off during recording,
the TV set goes off and the VCR continues
to record. Press the STOP button to halt
the recording and turn off the VCR.

•

The TV/VCR channel cannot be changed
during recording.

CH 012

INDEX

Press the PAUSE/STILL button to avoid recording
unwanted material.
“

” will appear on the screen and the REC/OTR

indicator will blink on and off. Press the PAUSE/STILL
button or the REC/OTR button to continue the recording.

NOTES: •

The PAUSE mode will be changed to STOP
mode after five minutes to prevent damage to
the tape.

• AUTO REWIND FEATURE

This TV/VCR will automatically rewind the video
cassette when the tape has ended (except
during OTR and Timer Record). It will also eject
the video cassette.

•

If the erase prevention tab is removed, the tape
will eject when the REC/OTR button is pressed
for recording.

Press the STOP button to stop recording.
“ 

■

 ” will appear on the screen.

SPECIAL PLAYBACK

TO VISUALLY SEARCH FOR DESIRED
POINTS

PICTURE SEARCH SPEED

PRESS TWICE

TAPE SPEED

PRESS ONCE

SP (Standard Play)

LP (Long Play)

SLP (Super Long Play)

SKIP SEARCH

TO WATCH STILL PICTURE

TO WATCH A TAPE REPEATEDLY

RECORDING A TV PROGRAM

RECORDING AND VIEWING THE
SAME TV PROGRAM

TV

- VHF/UHF channels

CABLE

- CABLE TV channels

TO STOP RECORDING

TO STOP RECORDING TEMPORARILY

4

Press the MENU button. If you

press the PLAY button, the tape
will play over and over until the
repeat mode is canceled.

PRESS TWICE

PRESS ONCE

5 X

9 X

15 X

3 X

7 X

9 X

TAPE SPEED

VIDEO CASSETTE TAPE

T120

2 hours

6 hours

T160

2-2/3 hours

8 hours

SP

Standard Play

SLP

Super Long Play

 5L80601A E P18-25

1/15/04, 8:19 PM

19