16
1
Pressez la touche MENU.
Pressez la touche TRACKING
SET + ou – pour choisir l’option
CH SETUP, puis pressez la
touche ENTER.
2
Pressez la touche TRACKING
SET + ou – pour choisir l’option
ADD/DELETE, puis pressez la
touche ENTER.
3
Sélectionnez le canal à effacer
ou ajouter de la mémoire en
utilisant les touches TRACKING
SET + ou –.
4
Pressez la touche ENTER pour
EFFACER (DELETE) le canal de
la mémoire. Pressez la touche
ENTER pour AJOUTER (ADD) le
canal non mémorisé. Répétez les
étapes 3 et 4 pour chaque
canal devant être ajouté ou effacé.
5
Pressez la touche MENU trois fois après avoir ajouté ou
effacé tous les canaux désirés, pour retourner au
visionnement de l’émission télévisée.
PROGRAMMATION DES CANAUX EN MÉMOIRE
Le magnétoscope peut recevoir un maximum de 181
canaux en préréglant les canaux dans la mémoire.
SÉLECTION TV/CATV
1
Pressez la touche MENU.
2
Pressez la touche TRACKING
SET + ou – pour choisir l’option
de CH SETUP, puis pressez la
touche ENTER.
3
Pressez la touche TRACKING
SET + ou – pour choisir le mode
TV/CATV.
4
Pressez la touche ENTER pour
sélectionner le mode TV ou CATV.
La flèche indique le mode
sélectionné.
AVANT DE COMMENCER
•
Mettez le téléviseur sous tension et réglez-le sur le canal
3 ou 4.
•
Pressez l’interrupteur d’alimentation (POWER) du
magnétoscope.
•
Appuyez sur le sélecteur TV/VCR pour sélectionner le
mode VCR (magnétoscope).
Lorsqu’un téléviseur est raccordé au magnétoscope à l’aide
d’un câble audio/vidéo, mettez le téléviseur et le
magnétoscope sous tension, puis sélectionnez le mode
d’entrée vidéo sur le téléviseur.
1
Pressez la touche MENU.
Pressez la touche TRACKING
SET + ou – pour choisir l’option
CH SETUP, puis pressez la touche
ENTER.
2
Pressez la touche TRACKING
SET + ou – pour choisir le mode
AUTO CH MEMORY, puis pressez
la touche ENTER.
3
La programmation automatique
démarrera. Le balayage des
canaux s’effectuera en ordre
ascendant et lorsque ceci est
complété, l’écran reviendra au
canal d’origine.
5
Pressez de nouveau la touche MENU pour retourner au
visionnement de l’émission télévisée.
Le syntonisateur de ce magnétoscope est doté d'une
mémoire de canaux qui vous permet de faire défiler les
canaux dans un ordre croissant ou décroissant pourvu
qu’ils soient programmés dans la mémoire, en sautant les
canaux non désirés. Avant de sélectionner les canaux, ils
doivent être programmés dans la mémoire du magnétoscope.
Outre les canaux VHF et UHF réguliers, ce magnétoscope
peut recevoir jusqu’à 113 canaux de câblodistribution.
Pour utiliser ce magnétoscope avec une antenne, réglez
l’option menu TV/CATV au mode TV. Lorsque l’appareil sort
de l’usine cette option menu est réglée au mode CATV.
PROGRAMMATION AUTOMATIQUE
DES CANAUX EN MÉMOIRE
AVANT DE COMMENCER
•
Mettez le téléviseur sous tension et réglez-le sur le canal
3 ou 4.
•
Pressez l’interrupteur d’alimentation du magnétoscope
(POWER).
•
Appuyez sur le sélecteur TV/VCR pour sélectionner le
mode VCR (magnétoscope).
Lorsqu’un téléviseur est raccordé au magnétoscope à l’aide
d’un câble audio/vidéo, mettez le téléviseur et le
magnétoscope sous tension, puis sélectionnez le mode
d’entrée vidéo sur le téléviseur.
1
Appuyez sur la touche MENU,
puis sur la touche TRACKING
SET + ou – pour sélectionner
l’option SYSTEM SETUP. Puis
appuyez sur la touche ENTER.
2
Appuyez sur la touche MENU,
puis sur la touche TRACKING
SET + ou – pour sélectionner
l’option NO NOISE BACK-
GROUND (DISPOSITIF
D’ELIMINATION DE PARA-
SITES).
3
Appuyez sur la touche ENTER
pour sélectionner la position ON.
4
Pressez de nouveau la touche
MENU.
DISPOSITIF D'ÉLIMINATION
DE PARASITES (ÉCRAN À
FOND BLEU)
Si l’on ne désire pas voir apparaître à l’écran un canal
dont le signal est trop faible, il est possible d’obtenir un
écran à fond bleu en activant le DISPOSITIF
D’ELIMINATION DE PARASITES (position ON). Lorsque
l’appareil sort de l'usine, ce DISPOSITIF
D’ELIMINATION DE PARASITES est activé.
TV
- Canaux VHF/UHF
CATV - Canaux du CABLE
POUR AJOUTER/EFFACER LES
CANAUX
Lorsque l'appareil sort de l'usine, l'option du menu TV/CATV est réglée
au mode "CATV" (câblodistribution).
Si vous n'utilisez pas la câblodistribution, choisissez l'option "TV".
SELECTION DU MODE TV/CATV
á ñ
á ñ
+0
á ñ
á ñ
á ñ
á ñ
á ñ
á ñ
á ñ
4F70301A-F P14-19
22/12/04, 15:41
16
Summary of Contents for JVHS3987D
Page 26: ...MEMO...
Page 27: ......
Page 52: ...J4F70301A 03 02 U Printed in Thailand Imprim en Tha lande...