22
４
, Disassembly, Assembly
（
Mechanical Assy
）
Replacement Procedure 4-68 Auto Cutter Unit
①
4-60 Wiring Harness 4pin
（
refer to the figure below
）
②
2-12 2pin
（
the figure below
）
③
Remove from the printer in the screw 2 locations.
④
Remove the 4-681 in the screw 2 locations.
Note) You need to adjust the print position and cut position.
(refer to Ch.4)
Replacement Procedure 4-9 BELT_TIMING
Loosen the 4-50 PLATE_TENSIONER screw.
Note) The belt tension is set correctly with 4-6 spring_tension.
Be sure not to move it when loosening screws.
Replacement Procedure 4-33 ROLLER_PLATEN
①
4-42 Spacer_Platen_Roller
②
2. Slide the 4-33 ROLLER_PLATEN and remove.
Note) Be careful not to drop or lose the 4-28 Bearing (d6-D10 F).
③
4-27 Bearing(d10-D15) and 4-47 E Ring
Mecha Flame R Assy
4-68 Auto Cutter Unit
2pin
4-68Auto Cutter Unit
4pin
