- 41 -
ESC a n
[Function]
Aligning the characters
[Code]
<
1B
>
H
<
61
>
H
<
n
>
[Range]
0
≦ｎ≦
2
、
48
≦ｎ≦
50
[Outline]
All the printed data within one line are aligned in the specified position.
Depending on the value “n”, positional alignment is carried out as shown in the table
below:
n Position
0,48
Left end alignment
1,49 Centering
2,50
Right end alignment
[Caution]
• This command is valid only when it is inputted at the beginning of a line.
• This command does not affect the PAGE MODE.
• Executes justification in the print area being set.
[Default]
ｎ＝
0
[Sample Program]
LPRINT CHR$(&H1B);"a"; CHR$(0);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"a"; CHR$(1);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"a"; CHR$(2);
LPRINT "AAAAA"; CHR$(&HA);
[Print Results]
AAAAA
AAAAA
AAAAA
Paper feed direction
Left-justified Centered Right-justified
