31
5.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The machine isn’t working
Check if machine is plugged
into power outlet
Connect to power source
No electricity from power
outlet
Check the power outlet for
electricity
Front cover is mounted
wrongly or magnet(s) are
missing
Check that the front cover is
mounted properly and that
the magnets are present on
left and right hand side of
the front cover.
The press elements are
blocked
Unplug the machine from its
electricity source and
remove the object which is
blocking the machine in the
press elements.
Safety detectors are
damaged.
Contact your customer
service representative.
ON/OFF switch damaged
Contact your customer
service representative.
Switching circuit is defect
Contact your customer
service representative.
Main switch off
Check if main switch on
rear of machine is switched
on.
Display shows „Front cover
right“
Front cover not mounted
properly;
Magnets not present;
Magnet switch damaged;
Ensure that the front cover
and the side chutes are
mounted properly.
Check if the magnets are
present in the side chutes.
(If yes, contact your
customer service
technician. If no, order new
front cover)
Display show “Front cover left”
Front cover not mounted
properly;
Magnets not present;
Magnet switch damaged;
Ensure that the front cover
and the side chutes are
mounted properly.