A
80
II
FRONT AND REAR
FOGLAMPS
(Ring A)
In foggy conditions, if the ambient brightness is not such as to activate
the automatic lighting, it is up to you to switch on your dipped beams
manually, along with your foglamps as necessary.
These
operate
in
conjunction
with
the sidelamps, the
dipped beams or the
main beams.
Headlamps adjustment
Depending on the vehicle load, it is
recommended that you correct the
height of your headlamp beams.
On the dashboard beside the driver :
0
Unladen
1
Partial load
2
Medium load
3
Full load.
Note :
Vehicles equipped with Xenon
dual-function directional headlamps
have an automatic adjustment of
headlamps depending on load.
For a vehicle equipped with
rear foglamps :
- 1
st
turn forwards : lighting of rear
foglamps.
- 1
st
turn rearwards: extinction of
rear foglamps.
For a vehicle equipped with
front and rear foglamps:
- 1
st
turn forwards: lighting of front
foglamps.
- 2
nd
turn forwards: lighting of rear
foglamps.
- 1
st
turn rearwards: extinction of
rear foglamps.
- 2
nd
turn rearwards: extinction of
front foglamps.
Note :
Foglamps should be used
only in conditions of fog or snowfall.
GUIDE-ME-HOME LIGHTING
With the ignition off, this func-
tion temporarily switches on your
headlamps to give you exterior
lighting when you are leaving your
vehicle.
This function is activated :
• Manually by pulling the control
stalk towards you, after switching
off the ignition.
• Automatically in the following
conditions :
- automatic headlamp lighting is
activated,
- and guide-me-home lighting is
activated.
See chapter “Multifunction display”.
Note :
It is possible to modify
the timing for the guide-me-
home lighting (around 60, 30 or
15 seconds) in the "Personalisa-
tion-Confi guration" menu.
For multifunction screen
A
, the
timing is fi xed.
S I G N A L L I N G
Summary of Contents for c4 picasso 2006
Page 25: ...28 II D A S H B O A R D ...
