123
9
D R I V I N G
ELECTRONIC PARKING
BRAKE
The electronic parking brake com-
bines 2 operational modes:
-
AUTOMATIC
Automatic application when the
engine stops and automatic re-
lease on use of the accelerator
(automatic operation by default),
-
MANUAL
Permanent manual application/
release of the parking brake is
possible by pulling control
A
while pressing the brake pedal.
Automatic operation
Application with the engine off
With the vehicle stationary, the park-
ing brake
is automatically applied
when the engine is switched off.
The application of the parking brake
is confi rmed by:
Application with the engine running
With the engine running and the ve-
hicle stationary, in order to immobi-
lise the vehicle you need to manually
apply the parking brake by
pulling
on control
A
.
The application of the parking brake
is confi rmed by:
- the lighting of the warning
lamp on control
A
and on
the instrument panel,
Before leaving the vehicle,
check that warning lamp
P
on the instrument panel is
permanently lit.
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.
- the display of a message "parking
brake applied" on the instrument
panel display.
An operation sound will confi rm to
you the application/release of your
electronic parking brake.
- the lighting of warning
lamp
P
on control
A
and
on the instrument panel,
- the display of a message "park-
ing brake applied" on the instru-
ment panel display.
When the driver’s door is opened, a
beep is heard and a message dis-
played if the parking brake has not
been applied.
Before leaving the vehicle,
check that warning lamp
P
on the instrument panel is
permanently lit.
