151
10
C H E C K S
DRAINING THE DIESEL FUEL
FILTER
Protective cover
Removal of the cover
Draining water from the fuel
filter
Drain regularly (at each oil change).
To drain the water, slacken the bleed
screw or the water in diesel fuel sen-
sor, located at the base of the fi lter.
Continue until all the water has
fl owed out.
Then retighten the bleed screw or
the water detection sensor.
HDi 110, HDi 173 and V6 HDi 208
engines
Pull the protective cover upwards
to remove it.
HDi 138 engine
Remove the protective cover by
fi rst unclipping at
3
, then
1
and
4.
Unclip at
2
by pulling towards
you, then lift up.
Refi tting
Firstly clip in at
2
.
Lower and centre the cover.
Clip in at
3
and
4
, pushing verti-
cally and gently from the rear.
Clip in at
1
pushing vertically.