53
3
C O M F O R T
Adjusting the operating duration
Press button
3
and hold it down,
press button
2
or
7
at the same
time. Release button
3
. The time
and symbol
6
fl ash.
Press again on button
3
and hold
it down, press button
2
or
7
at the
same time. Release button
3
.
The programmed operating du-
ration is displayed and symbol
8
fl ashes.
Adjust the operating duration
with button
2
or
7
.
To memorise the setting, press
button
3
or wait until the display
goes off.
Immediate start-up
Press button
5
.
The screen displays the symbol
8
and
the remaining operating duration. This
can be adjusted. The maximum dura-
tion is 30 minutes.
The warning lamp
8
lights up and
remains lit for the whole duration of
the system’s operation. The dura-
tion of the system’s operation disap-
pears after 10 seconds.
Start-up of the heating system can
be programmed between 1 minute
and 24 hours in advance.
Adjusting the remaining
operating duration
When the heating mode is active,
the remaining operation duration
can be modifi ed by between 10 and
30 minutes using buttons
2
or
7
.
Programming the start-up time
You can store up to three different
start-up times, but programme only
one delayed start-up time.
Factory settings
A
:
● Start time
1
: 06.00.
● Start time
2
: 16.00.
● Start time
3
: 22.00.
The factory settings are replaced
once you adjust them. The pro-
grammed times are stored until they
are reprogrammed.
Press button
3
several times until
the programmed start-up time is
displayed, then buttons
2
or
7
, in
the next 10 seconds until the de-
sired start-up time is displayed.
Before programming the delayed
start-up of the heating, you must
ensure that the clock is set to the
correct time.
