Citronic MPSD-1 Operating Instructions Manual Download

Page: 14 / 15

FIRMWARE VERSION

You may display the unit firmware version Firmware is

the unit internal programming code. Once enter preset

menu and then turn the TRACK KNOB until Vxx.xx is

displayed. “x’s” are the version number.

FIRMWARE upgrade:

BASIC OPERATION

Step1: Copy the controller code or DSP code from PC

nd then save into memory device (Files must be in

root directory).

Step2. Off the controller power cord and re-plug in.
Step3: Press STANDBY button to power on
Step4:

Insert memory device into player A, USB port or SD card slot 1

to upgrade and “Update 10%~100%”

will show in the display (for DSP code), “UpdateUIxx” will show in the display (for controller code)

Step5: When upgrade is done ”COMPLETE” will display, removed memory device

Step6: Off the controller power cord

nd re-plug in. After pressing the STANDBY to power on, if “UpdateUI - -”

is displayed (failure), please repeat procedure step2 to step5.

Step7: Check the version number of the new firmware in the

RESET MENU

Step8: Done

Note:
1. Please delete the code within memory device when upgrade has already done.
2. Power disconnection during processing or unknown memory device will cause failure

Summary of Contents for MPSD-1
















Search results

Summary of Contents for MPSD-1

Reviews:

Related manuals for MPSD-1

Brands by name

Popular brands

Citronic MPSD-1, Operating Instructions Manual

Search results

Summary of Contents for MPSD-1

Reviews:

Related manuals for MPSD-1

Brands by name

Popular brands