background image

SPECIFICATIONS 

 

Model 

SMFX200 2ch DJ mixer 

Power 

AC 100~240V, 60/50Hz, 14 Watts 

Dimensions 

223 (W) x 296.7 (D) x 105.9 (H)mm 

Weight ca.6 

kg 

 
Input/output impedance & sensitivity: (EQ flat, maximum gain, FX OFF, load=100K ohm) 

Input impedance and reference level: 

 

Line 

10K ohm /-14dBV +/-0.1dB (200mV) 

 

Aux 

47K ohm /-14dBV +/-0.1dB (200mV) 

 

Phono 

47K ohm /-50dBV +/-0.1dB (2mV) 

 

Mic 

10K ohm /-54dBV +/-0.1dB (2mV) 

 

Return 

20K ohm /-10dBV +/-0.1dB (316mV) 

Output impedance and level: 

 

Send 

2.2K OHM /-10dBV (316mV) +/-2dB 

 

Rec 

2.4K OHM /-10dBV (316mV) +/-2dB 

 

Master unbal. 

1K OHM /0dB (1V) +/-2dB 

 

Master bal. (load=600 
ohm) 

600 OHM /+4dBm (1.23V) +/-2dB 

 

Phones (load=32 ohm) 

33 OHM /0dBV (1V) +/-2dB 

Frequency response: (EQ flat, maximum gain, FX OFF, master output, load=100K ohm) 

 Line, 

Aux 

25-20KHz 

+/-2dB 

 

Phono 

25-20KHz +2/-3dB (RIAA) 

 Mic 

25-20KHz 

+2/-3dB 

THD + N: (EQ flat, maximum gain, FX OFF, W/20KHz LPF, master output, load=100K ohm) 

 

Line, Aux 

Less than 0.04% 20-20KHz 

 

Phono 

Less than 0.15% @ 1KHz (A-weighted) 

 

Mic 

Less than 0.15% @ 1KHz (A-weighted) 

Maximum input: (1KHz, master output, THD=1%, EQ flat, FX OFF, maximum gain) 

 Line, 

Aux 

+4dBV 

 Phono 

-36dBV 

 Mic 

-36dBV 

 Return 

+8dBV 

Maximum output: (EQ flat, maximum gain, FX OFF, THD=1%, load=100K ohm) 

 

Send 

More than +8dBV (2.5V) 

 

Master 

More than +18dBV (8.0V) 

 

Rec 

More than +8dBV (2.5V) 

 

Phones 

More than +4dBV (1.6V) load=32 ohm 

S/N ratio: (Maximum gain EQ Flat, W/20KHz LPF, A-weighted, FX OFF, master output) 

 

Line, Aux 

More than 80dB 

 

Phono 

More than 69dB 

 

Mic 

More than 64dB 

Crosstalk: (Maximum gain, EQ flat, FX OFF, W/20KHz LPF, A-weighted, master output) 

 

Line, Aux, Phono:

More than 70dB @1KHz between L and R channel 

 

 

More than 70dB @1KHz between channels 

 
 
 

Summary of Contents for SMFX-200












Reviews: