Page 15 of 31
6550 PDS-375 TRX Manual R6.docxx
miniZapi
The min-zapi menu allows individual configuration of connected CKDMX fixtures, including
resetting the fixture to the default CKDMX “Light 1” (starting DMX address 001) and
selection of 8 or 16 bit operation. Connected fixtures may be zapi-ed together using
All
mZapi
(all miniZapi) or may be zapi-ed individually using individual
Port mZapi
(Port
miniZapi). The zapi configuration options for
All mZapi
and individual
Port mZapi
are the
same and are listed below:
•
All mZapi
or
•
Port 1-6 mZapi
–
Set Address to 1
–
Set DMX Mode
–
Set LED D4 – D1
–
Set LED Fast
–
Set Contrl RGB5
–
Set Contrl RGB3
–
Set Contrl RGBAW
–
Set Tung. Curve
–
Set Normal Curve
–
Set Linear Curve
–
Set 8 bit mode
–
Set 16 bit mode
Scene Setup
In the Scene Setup menu you can assign any one of the stand-alone routines to each of 6
Scenes and then configure the unit to play those Scenes in the order and times you select using
the Fade Time and Follow Time settings. Fade Time sets the fade time within the routine
assigned to the Scene, e.g. the time for a cross fade between colors in Color Wash. Follow
Time sets the time the Scene will play before the unit moves to the next assigned Scene. An
internal Grand Master setting is also applied when running the PDS-375 TRX in this mode. Up
to 6 Scenes can be configured and any unused Scenes can be disabled. Use the > Menu
settings to set the Grandmaster level, fade time and follow time for each Scene. Select
Internal
Scenes
in the Input Menu to edit Scenes live and enable playback.
Scene1: >
•
Disabled
•
Fixed
Color
•
Random
Fade
•
Random
Color
•
Colorwave
18Lgt
•
Colorwave
12Lgt
•
Colorwave
16Lgt
•
Cross
Fade
•
Color
Wash
