Appendix C: Philips ColorBlast 12 TRX Control Flow Chart
Page 30 of 31
6550 PDS-375 TRX Manual R6.docxx
ADDR
1–512
RED
0–255
DMX
GRN
0–255
MODE
BLUE
0–255
FIXD
AMBR
0–255
0–255
WHT
NORM
CTRL
RGB5
RGB3
8
BIT
16
NORM
CFG
CURV
LINR
TUNG
FAST
D–1
SPD
D–2
D–3
D–4
VER
INFO
S/N
TEMP
VOLT
1
UTIL
UNLK
2
5
PROF
SAVE
DFLT
1
LOAD
2
1
MAIN
UI
No
Yes
2
TEST
RUN
RESTORE DEFAULTS?
LOCK
Set the fixture’s starting DMX address
Run the fixture self-test
5-channel (RGBAW) DMX input, 5-channel output
3-channel (RGB) DMX input mapped to 5-channel output
3-channel (RGB) DMX input, 3-channel output (no A or W)
8-bit
16-bit
Gamma curve that matches most Philips Color Kinetics fixtures
Linear relationship between DMX input and power output
Tungsten / incandescent dimming curve
Fastest setting: Instant snap when intensity changes
Slowest setting
Set the fixed color
to display in
standalone mode by
adjusting the
intensity of each
channel
Put the fixture
in DMX mode or
fixed color mode
Set the fixture’s
color control
mode
Set the fixture’s
resolution
Set the fixture’s
dimming curve
Set the LED
transition speed
Display information
about the fixture
Set the menu
unlock time
Save current settings
as profiles, and load
saved profiles
Firmware version of
main LED board
Firmware version of
menus (user interface)
Serial number
Current internal operating temperature
Current input voltage
1 second
2 seconds
5 seconds
Reapply saved profile 1
Reapply initial
factory settings
Reapply saved profile 2
Save current settings as profile 1
Save current settings as profile 2
Menu Button Behavior
Return
Returns
to
the
previous menu in the
tree
Enter
Advances
to
the next menu, or
confirms selection
Up
Moves up in the
current menu’s set of
options
Down
Moves
down
in
the current menu’s set
of options