Page 14 of 29
▪
iW 8-bit
▪
RGBAW 16-bit
▪
RGBAW 8-bit
▪
RGB5 16-bit
▪
RGB5 8-bit
▪
RGB3 16-bit
▪
RGB3 8-bit
miniZapi
The min-zapi menu allows individual configuration of connected CKDMX fixtures, including
resetting the fixture to the default
CKDMX “Light 1” (starting DMX address 001) and selection of
8 or 16 bit operation. Connected fixtures may be zapi-ed together using
All mZapi
(all
miniZapi) or may be zapi-ed individually using individual
Port mZapi
(Port miniZapi). The zapi
configuration options for
All mZapi
and individual
Port mZapi
are the same and are listed
below:
•
All mZapi
or
•
Port 1-12 mZapi
–
Set Address to 1
–
Set DMX Mode
–
Set LED D4
– D1
–
Set LED Fast
–
Set Contrl RGB5
–
Set Contrl RGB3
–
Set Contrl RGBAW
–
Set Tung. Curve
–
Set Normal Curve
–
Set Linear Curve
–
Set 8 bit mode
–
Set 16 bit mode
Scene Setup
In the Scene Setup menu you can assign any one of the stand-alone routines to each of 6
Scenes and then configure the unit to play those Scenes in the order and times you select using
the Fade Time and Follow Time settings. Fade Time sets the fade time within the routine
assigned to the Scene, e.g. the time for a cross fade between colors in Color Wash. Follow
Time sets the time the Scene will play before the unit moves to the next assigned Scene. An
internal Grand Master setting is also applied when running the PDS-750 TRX in this mode. Up
to 6 Scenes can be configured and any unused Scenes can be disabled. Use the > Menu
settings to set the Grandmaster level, fade time and follow time for each Scene. Select
Internal
Scenes
in the Input Menu to edit Scenes live and enable playback.
Scene1: >
•
Disabled
•
Fixed Color
•
Random Fade
•
Random Color
•
Colorwave 6Lgt
•
Colorwave 12Lgt
•
Colorwave 18Lgt
