Page 22 of 29
Power
This menu allows adjustment of radio broadcast power which is used during wireless RDM
responses.
RDM
Device Label: This label is user defined. You can edit the label by pushing the Enter button. A
blinking cursor will appear under the first character in the label. Use the Up and Down Buttons
to change characters and use the Right and Left buttons to move through the text string. Press
Enter again to record your label. For example, if you had PDS-750 TRXs located in front of the
DJ Booth, you could give them RDM Labels like “DJ Boot Left” and “DJ Booth Right”
Unique ID: The RDM unique ID is factory set and unique for each RDM responder.
PDS-750 TRX is a fully compliant RDM Receive Responder and can be monitored and
configured via wireless RDM using the SHoW DMX RDM Monitor (embedded in the SHoW
DMX Transmitter). The following device information is available via wireless RDM:
Unique RDM ID (read)
Device Label (set and read)
Starting DMX Address (set and read)
Output fault status (read)
Port configuration
SHoW ID (set and read)
Broadcast Power (set and read)
Receive signal strength (read)
Internal PCBA temperature (read)
Power supply voltage (read)
For more deta
ils, see The SHoW DMX System User’s Manual.
