7
6.
Installation
In order to install the product correctly, please follow the below steps:
STEP 1
:
IMPORTANT!
Turn off main power at the main switch board.
STEP 2
: Loosen the screws of the original wall switch. Remove the switch and
disassemble the wiring.
STEP 3:
Connect the main power cable to the Live and Neutral terminals and the
load cable to the Load terminals at the rear cabinet of the product.
STEP 4:
Fasten the screws of all terminals and check that the wires are properly
secured. Retrofit the switch into the standard switch box and mount it on the wall by
fastening the two screws at the rear of the switch box.
wall box
CG800
power unit
CG800
button panel
CG800 frame
Screw x 2 pcs
Screw x 4 pcs