5
Table 4A
Load terminals
1
2
3
4
CG800S1 One Gang Switch
Load1
NC
NC
NC
CG800S2 Two Gang Switch
Load1
Load2
NC
NC
CG800S4 Four Gang Switch
Load1
Load2
Load 3
Load 4
CG800DM One Gang Dimmer
Load1
NC
NC
NC
CG800DM2 Two Gang Dimmer
Load1
Load2
NC
NC
CG800S2-CCP One Gang Curtain
Control Switch
Motor 1
Forward
Motor 1
Backward
NC
NC
CG800S4-CCP Two Gang Curtain
Control Switch
Motor 1
Forward
Motor 1
Backward
Motor 2
Forward
Motor 2
Backward
Before getting started
WARNING!
Install in accordance with all national and local electrical codes.
IMPORTANT!
Citygrow® is not liable for any damage incurred with the misuse of this product.
IMPORTANT!
Pre-setup can only be done by a professional worker or manufacturer agent.
WARNING!
It must be installed by a qualified electrician in accordance with all applicable regulations and building
codes. Improper wiring can result in personal injury or damage to control units or other equipment. Always turn off
circuit breaker or remove main fuse from power line before doing any work. To avoid overheating and possible damage
to equipment.
WARNING!
Do not operate when any lamps removed or burned out; replace any burned out lamps immediately; use
only transformers that incorporate thermal protection or fused primary windings. ! This product is designed for residential
and commercial use, for indoor use only.