Cleaning of Bubbler
•
Bubblers : Mineral deposits on
the orifice can cause water flow
to spurt or not regulate. Mineral
deposits may be removed from
the orifice with a small round file
not over 1/8” (3 mm) diameter
or small diameter wire.
CAUTION: DO NOT file or cut orifice
material. Care must be taken not to
damage the orifice(s)
•
Water Flow: Confirm proper
water flow. If water flow is slow,
inspect filter or inline strainer for
restriction.
•
Strainer: Remove screen and
rinse thoroughly with water.
14/05/2019
5