CK-PAD2.0 Hardware-based Interactive Whiteboard User Manual
- 16 -
Fig 7.5 Second level of input signal selection
7.2.6 Mouse function button
The mouse function is only available when input signal is from HDMI or VGA of computer,
otherwise clicking on the mouse function button or other operation won
’
t work.
As the mouse function work in normal condition, the green frame will light on the mouse
function button, for more operations, please refer to the following specifications:
1) Use male USB-A / B connectors on both ends, connect A-type interface to computer,
B-type interface to whiteboard (this cable would be available within the whiteboard
package).
2) Use the copy mode extend signal from PC.
3
）
Connect the USB cable with the computer that extends signal to the whiteboard.
4
）
After powering on white board, the default mode remains to be functional status as it is
in the memory last time, you must switch to the right input signal first, then select mouse
function button (Green frame will light on the mouse function button), the operations would
be saved when turning on next time.
5
）
Single-click on the desktop means left-click, double-click means right-click, Long touch
for 0.5 seconds, right-click option appears after lifting fingers.
