CK4L-3000B instruction
Shenzhen Createk Electronics
·
www.ckdz.com
·
Tel: +86-755-26643017
·
Fax:
+86-755-26644342
Address
：
Floor 2/3,8 Block,A Area,Tanglang Industry Zone,Xili Town,Nanshan District , 518055, Shenzhen City
Connector: Owen Zhong, E-mail:
zhongke@ckdz.com
, Mobile: +86 13714452125 Page 6 of 26
3.
Hardware connection
3.1
Rear panel diagram
Picture
1
3.2
Interface instruction
3.2.1
Video signal input
CK4L-3000B series support different video format input
Interface
Instruction
V1~V3
3 channel PAL/NTSC composite video inputs
YPbPr
1 channel HD video components signal input
VGA
1 channel computer graphic video signal input
DVI
（
HDMI
）
2 channel computer digital signal inputs
HD-SDI/SDI
（
IN
）
1 channel digital video signal input(HD digital video –
optional
)
3.2.2
Video signal output
Interface
Instruction
VGA OUT
Analog RGB signal output, it connects with a monitor
for monitoring (highly recommend to use this interface
during operation and setting)
HDMI OUT1 /
HDMI OUT2/
Two HDMI(DVI) digital signal output, can connect 2
sending cards or built them inside
SDI / HDSDI
（
OUT
）
1
1 channel digital video signal surrounding output
(
optional
)
3.2.3
Other signal interface
RS232 Serial communication input
LAN Ethernet communication input
The 2 sending cards are located to the right side (refer to the above diagram)
