CK4L-9000 Series User Manual
-
20
-
Figure 4.23 Adjust the output resolution
4.6.2
Network setting
Clicking the item “Net Set”, it will appear a signal source setting interface as below.
Figure 4.24 Network settings interface
In this window, you can set the IP address, IP address mode and baud rate etc.. It is
mainly used for setting the processor and control computer IP address within a same
segment in the network control. The operations described in this section are too
professional. So for general users, this operation is not suggested. If you do need to
operate, please contact with our company sales.
4.6.3
Output setting
Clicking the button
【
Output
】
,it will pop up a setting interface as below:
