29
Water Filter
The Zip HydroTap notifi es when fi lter replacement is due. If you
notice one of the following, you will need to change the fi lter.
> The Change Filter LED will fl ash white once a second and remain
so until reset. The fi lter status light is located below the levers on
the tap head assembly.
> The fi lter percentage will show 0% on the Home screen.
Note:
Depending on local water quality conditions and usage, the
fi lter may require changing anywhere from 500 Ltrs to 10000 Ltrs.
You may also need to replace the fi lter if you notice unpleasant
odours or tastes.
Some water may drip from the
fi lter head (socket) during re-
placement. Keep a towel handy to
dry up any drips.
Filter Maintenance
LCD Screen operation - Section F
Dispense Times
The ability to change the maximum dispensing time for cold water
has been introduced. The default settings for the maximum dispens-
ing time is 15 seconds. Here, the operator may change the dispens-
ing time to between 5 and 15 seconds, in increments of 1 second. To
edit the dispensing time:
1. Press the [MENU] button for
main menu.
2. Press the [Setting] button.
3. Press the [Dispense Time]
button.
4. Using the up and down arrow
keys to set the dispense time.
