10
Drape the tent over the supported hoops, then go inside and attach the roof Velcro straps.
Feed the length of the porch poles through the hoop sleeves sewn on the tent. Slide the porch hoop poles
onto the porch poles. Install adjustable spreader poles (item 27).
Attach the floor hoop Velcro. Install and connect the buckle in the middle of the tent. Inspect the tent for
proper fit.
IMPORTANT!
When collapsing the Denali it is very important to collapse the two porch hoop poles first
to relieve tension on the tent when folding. Failure to collapse the floor hoop poles first may cause the
tent to tear at the corners and in this case the tent will not be covered under warranty.
When collapsing, lay hoop poles on base first one side then the other until all hoops are on top of base.
Porch pole Velcro
Hoop sleeves
Porch Pole Velcro
Hoop sleeves
Adjustable Spreader Pole
Adjustable Spreader Pole
Middle Buckle
