Installing the Privacy Divider on your Quickset Cabin
1. Locate the divider found in the carry bag
and take it out. Find the top of the panel-
the top is the side that the zipper does not
go all the way to the end.
2. Install the barrel located on the divider
panel through the loop on the inside of the
tent at the midpoint. Once you have one
installed, continue around the divider panel
until all 7 barrels are installed into the
corresponding hoops. Access and privacy are
attained by simply zipping the panel open or
closed.
Note: The privacy divider should always
be removed when taking down your
shelter after use. Due to the way the
panels collapse and fold for storage,
damage could occur to the panel or tent if
it's left in.
