background image

©2004 United Air Specialists
Part No. 44-10448-0001
08/09

United Air Specialists, Inc. 

reserves the right to change 

design or specifications 

without notice.

4440 Creek Road • Cincinnati, Ohio 45242 USA

National Phone: 1-800-252-4647

Telephone: (513) 891-0400 • Fax: (513) 891-4882

www.uasinc.com

UNITED AIR SPECIALISTS, INC.

LIMITED WARRANTY

UAS warrants to the original purchaser that all equipment will be free from defects in materials and
workmanship for one year from the date of shipment from UAS (three years for Smokeeter® and
VisionAir™ models other than CC and DC series) and that major structural components on SFC and MCB
series will be free from defects in materials and workmanship for ten years from the date of shipment from
UAS.  This warranty applies only if equipment is properly installed, maintained, and operated under normal
conditions and does not apply to damage caused by corrosion, abrasion, abnormal use or misuse,
misapplication, or normal wear and tear.  This warranty will be void with respect to equipment that is subject
to unauthorized repairs or modifications.  UAS makes no warranty as to goods manufactured or supplied by
others.  This warranty is subject to any limitations in UAS’ quotation and may not be modified except by a
written instrument signed by the President or Vice President of Sales of UAS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER
WRITTEN, ORAL

OR IMPLIED, INCLUDING ANY

IMPLIED WARRANTY

OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.

As Purchaser's exclusive remedy for any defects in the equipment, UAS will exchange or repair any
defective parts during the warranty period, provided such parts are returned, prepaid, to UAS' factory.  The
obligation of UAS is limited to furnishing replacement parts F.O.B. UAS' factory or making repairs at UAS'
factory of any parts that are determined, upon inspection by UAS, to be defective.  In no event will UAS be
responsible for labor or transportation charges for the removal, reshipment or reinstallation of the parts.

IN NO EVENT WILL UAS BE RESPONSIBLE FOR ANY SPECIAL OR CONSEQUENTIAL
DAMAGES.

Summary of Contents for UAS V Series





















Reviews: