DOC ID - 1998
• Rev 01
3 / 11
Adding the thermostat in ClareHome
Once you have installed and setup the thermostat using the Ecobee app, add
and configure it with the ClareHome app.
Notes
•
The Ecobee thermostat and ClareOne panel (or CLIQ.mini/host) must be
connected to the internet to complete this process. The Ecobee cannot be
added when a CLIQ.mini is in AP mode.
•
You will need the
homeowner’s
Ecobee account credentials.
•
The thermostats must be added and configured on the Ecobee website/app
before they can be added to ClareHome.
To add the thermostat in the ClareHome app:
1. Tap the
ClareHome app’s
Devices
page.
2. Tap
+ Add Device
.
